Zoomlion aerial work platform rental - fully electric telescopic boom lifts up to 28.7 m

Zoomlion is one of the largest construction machinery manufacturers in the world - and in access equipment one of the manufacturers that has pushed the switch to battery-electric drive most consistently. At Luibl Rental you can rent Zoomlion aerial work platforms from the ZT series: three fully electric telescopic boom lifts with working heights from 20.60 m to 28.70 m that work without local emissions and still handle rough terrain. We deliver by low-loader from Passau throughout the Czech Republic, on request including transport and operator briefing.

Our Zoomlion fleet fills a gap the market left open for a long time: great working heights without a combustion engine. All three machines come from the ZT series, the telescopic boom lift range of Zoomlion Access, and were built in 2024.

Zoomlion ZT18JE-Li - 20.60 m working height

The most compact of the three machines. 13.30 m outreach, 300 kg load capacity, 8,600 kg dead weight and a transport height of only 2.57 m. The entry into the electric telescopic class when space is tight.

Zoomlion ZT21JE-Li - 22.95 m working height

Three-section boom, 15.50 m outreach and dual load capacity: up to 454 kg in the restricted working range. This takes two fitters with tools and material up in a single lift.

Zoomlion ZT26JE - 28.70 m working height

The largest machine in the Zoomlion fleet, with 22.10 m outreach and an 80-volt lithium system. A height class otherwise offered almost exclusively with diesel drive.

All three platforms have a superstructure with continuous 360 degree rotation, a basket that swivels by +/-90 degrees and a jib that lets you reach work points behind and above obstacles.

The common reservation about electric platforms is: fine for the hall, unsuitable for the construction site. That does not apply to the ZT series. The machines stand on a rough-terrain chassis with all-wheel drive and a permanently active oscillating axle and handle gradients of up to 45 % (24 degrees). The tyres are foam-filled, so punctures are no longer a cause of downtime.

The energy comes from lithium-ion systems - 51.2 and 51.52 volts on the two smaller machines, 80 volts on the ZT26JE. Compared with conventional lead-acid batteries, this delivers more usable capacity at lower weight and significantly shorter charging times. Drive and lift work with maintenance-free electric motors.

For operation this means three things: no local exhaust emissions, a noticeably lower noise level and no fuel logistics on site - no jerrycans, no refuelling, no storage of substances hazardous to water.

Electric drive is not an end in itself. There are specific situations in which it decides whether a job can be carried out at all:

• Maintenance during operation. In production halls, logistics centres and warehouses where staff are permanently present, a diesel platform is usually ruled out.
• Emission restrictions in city centres. Low-emission zones and project-specific requirements increasingly exclude combustion engines.
• Night and weekend work near residential areas. Noise protection requirements are much easier to meet with a battery machine.
• Enclosed areas. Underground car parks, multi-storey car parks, tunnels and halls without sufficient ventilation.
• Sensitive production environments. Food, pharmaceutical and electronics manufacturing with air quality requirements.

If a working height above 20 metres is added to one of these situations, the choice on the market quickly becomes thin. That is exactly why we added the Zoomlion ZT series to our fleet.

Zoomlion Heavy Industry Science and Technology Co., Ltd. was founded in 1992 and is based in Changsha in the Chinese province of Hunan. The company is listed on the Shenzhen and Hong Kong stock exchanges and develops and manufactures construction and agricultural machinery across 18 product categories. Its access equipment is grouped under the Zoomlion Access brand; the ranges include scissor lifts, articulating boom lifts and the ZT series telescopic boom lifts. The machines we use are CE-marked and meet the European requirements for mobile elevating work platforms.

Safety, inspections and operator briefing

Every machine in our fleet is maintained in accordance with CSN EN 280 and undergoes periodic inspections under Government Regulation No. 378/2001 Coll. The operation of aerial work platforms is governed by occupational safety rules (Act No. 309/2006 Coll.) and Government Regulation No. 378/2001 Coll.: operators must be trained and authorised in writing by the employer. On handover we brief your operators on site.

For all work on telescopic boom lifts we recommend suitable personal fall protection equipment and help you choose the machine based on load charts, set-up area and ground conditions at your site.

• Height class without local emissions. With the ZT26JE we offer 28.70 m working height fully electric - in a segment where the market mainly offers diesel.
• Delivery throughout Czechia. We deliver with our own low-loader fleet from Passau directly to your site. You can find more information under Transport.
• Expert advice. We clarify set-up area, ground load, outreach and accessibility with you in advance - not only when the machine is on site.
• Young fleet. All Zoomlion machines were built in 2024.

Enquire about a Zoomlion aerial work platform

Are you planning a job with a Zoomlion aerial work platform? We check availability for your period and prepare an individual quote for you. You can find the full range of this type under Telescopic boom lifts, and an overview of all platform types under Aerial work platforms.