Merlo Roto telehandler rental: one machine for lifting, crane work and work at height

When you rent a Merlo Roto, you get a forklift, a crane and an aerial work platform in one machine: the superstructure rotates through 360 degrees while the chassis stays in one place on its outriggers. Luibl Rental has twelve Merlo Roto models in its rental fleet, with 4,000 to 7,500 kg load capacity and 15.80 to 34.00 m lift height.

On confined sites, every repositioning of a fixed telehandler costs time: retract the outriggers, manoeuvre, realign, set up again. On facades, halls and high-rise buildings with many load points, this adds up over the day. A roto telehandler serves the full circle around the machine from a single position. With the right attachment, it also takes on tasks that would otherwise require a mobile crane or a separate aerial work platform.

Image of a rental machine of type TSR-4016 | Merlo Roto 40.16

TSR-4016 | Merlo Roto 40.16

Lifting capacity
4.000 kg
Lifting height
15,80 m
Lateral reach
13,20 m
Dimensions
6,28 m x 2,24 m x 2,98 m
Drive unit
Diesel
Image of a rental machine of type TSR-4018 | Merlo Roto 40.18S

TSR-4018 | Merlo Roto 40.18S

Lifting capacity
4.000 kg
Lifting height
17,70 m
Lateral reach
15,00 m
Dimensions
6,03 m x 2,24 m x 3,03 m
Drive unit
Diesel
Image of a rental machine of type TSR-5021 | Merlo Roto 50.21S

TSR-5021 | Merlo Roto 50.21S

Lifting capacity
4.950 kg
Lifting height
21,00 m
Lateral reach
17,90 m
Dimensions
6,83 m x 2,43 m x 3,12 m
Drive unit
Diesel
Image of a rental machine of type Merlo Roto 60.24 MCSS

Merlo Roto 60.24 MCSS

Lifting capacity
6.000 kg
Lifting height
24,00 m
Lateral reach
20,00 m
Dimensions
7,43 m x 2,49 m x 3,10 m
Drive unit
Diesel
Image of a rental machine of type TSR-7024 | Merlo Roto 70.24S

TSR-7024 | Merlo Roto 70.24S

Lifting capacity
7.000 kg
Lifting height
24,20 m
Lateral reach
20,50 m
Dimensions
7,545 m x 2,49 m x 3,16 m
Drive unit
Diesel
Image of a rental machine of type Merlo Roto 75.25

Merlo Roto 75.25

Lifting capacity
7.500 kg
Lifting height
24,30 m
Lateral reach
20,50 m
Dimensions
7,61 m x 2,49 m x 3,12 m
Drive unit
Diesel
Image of a rental machine of type Merlo Roto 40.26

Merlo Roto 40.26

Lifting capacity
4.000 kg
Lifting height
26,00 m
Lateral reach
22,90 m
Dimensions
6,98 m x 2,40 m x 2,99 m
Drive unit
Diesel
Image of a rental machine of type TSR-5026 | Merlo Roto 50.26S

TSR-5026 | Merlo Roto 50.26S

Lifting capacity
4.950 kg
Lifting height
26,00 m
Lateral reach
22,90 m
Dimensions
7,15 m x 2,43 m x 3,12 m
Drive unit
Diesel
Image of a rental machine of type TSR-7028 | Merlo Roto 70.28S

TSR-7028 | Merlo Roto 70.28S

Lifting capacity
7.000 kg
Lifting height
28,00 m
Lateral reach
20,50 m
Dimensions
8,31 m x 2,54 m x 3,325 m
Drive unit
Diesel
Image of a rental machine of type TSR-5030 | Merlo Roto 50.30S Plus

TSR-5030 | Merlo Roto 50.30S Plus

Lifting capacity
4.950 kg
Lifting height
29,20 m
Lateral reach
25,40 m
Dimensions
7,79 m x 2,49 m x 3,16 m
Drive unit
Diesel
Image of a rental machine of type Merlo Roto 40.30 MCSS

Merlo Roto 40.30 MCSS

Lifting capacity
4.000 kg
Lifting height
29,50 m
Lateral reach
25,40 m
Dimensions
7,56 m x 2,49 m x 3,10 m
Drive unit
Diesel
Image of a rental machine of type TSR-5035 | Merlo Roto 50.35S Plus

TSR-5035 | Merlo Roto 50.35S Plus

Lifting capacity
4.950 kg
Lifting height
34,00 m
Lateral reach
27,00 m
Dimensions
8,59 m x 2,54 m x 3,325 m
Drive unit
Diesel
Mehr anzeigen

Twelve Merlo Roto models cover 15.80 to 34.00 m lift height

Which Merlo Roto is right depends on the lift height and the load at the most distant placement point. The rated load capacity only applies close to the machine; as outreach increases, the permissible load drops significantly according to the load chart. Choose the model by the least favourable load point, not by the highest load capacity.

Up to 21 m lift height: compact for confined sites and courtyards

  • Merlo Roto 40.16: 15.80 m lift height, 4,000 kg load capacity, 13.20 m outreach, 2.24 m wide
  • Merlo Roto 40.18S: 17.70 m lift height, 4,000 kg load capacity, 15.00 m outreach, 2.24 m wide
  • Merlo Roto 50.21S: 21.00 m lift height, 4,950 kg load capacity, 17.90 m outreach

24 to 28 m lift height: the class for building construction and installation

  • Merlo Roto 60.24 MCSS: 24.00 m lift height, 6,000 kg load capacity, 20.00 m outreach
  • Merlo Roto 70.24S: 24.20 m lift height, 7,000 kg load capacity, 20.50 m outreach
  • Merlo Roto 75.25: 24.30 m lift height, 7,500 kg load capacity, 20.50 m outreach
  • Merlo Roto 40.26: 26.00 m lift height, 4,000 kg load capacity, 22.90 m outreach
  • Merlo Roto 50.26S: 26.00 m lift height, 4,950 kg load capacity, 22.90 m outreach
  • Merlo Roto 70.28S: 28.00 m lift height, 7,000 kg load capacity, 20.50 m outreach

29 to 34 m lift height: for tall facades, industry and steel construction

  • Merlo Roto 50.30S Plus: 29.20 m lift height, 4,950 kg load capacity, 25.40 m outreach
  • Merlo Roto 40.30 MCSS: 29.50 m lift height, 4,000 kg load capacity, 25.40 m outreach
  • Merlo Roto 50.35S Plus: 34.00 m lift height, 4,950 kg load capacity, 27.00 m outreach

All models are diesel-powered. The full data sheets are on the individual model pages.

Roto or fixed: a Merlo Roto pays off with many load points in a confined space

The Merlo Roto plays to its strengths where a fixed telehandler would have to reposition constantly. For pure material handling on open, level ground, a fixed machine is usually the more economical choice.

  • Rotating superstructure: The Roto models slew the load all around the machine. One position covers load points in front of, beside and behind the machine.
  • Outriggers: The Roto models only reach full lift height and outreach when stabilised. This provides stability at great height but costs time with every repositioning.
  • Lift height: The Roto range in the rental fleet starts at 15.80 m and reaches up to 34.00 m. Below that, fixed telehandlers cover most tasks.
  • Space requirement: Because the chassis stays put, the Roto needs less manoeuvring space than a fixed machine that has to drive up to every load point.

If you mainly handle pallets on level ground, you will find suitable machines among the fixed Merlo telehandlers. An overview of all Merlo machines in the rental fleet is on the page Merlo rental.

With attachments, the Merlo Roto becomes a crane or an aerial work platform

The roto telehandler changes its job by changing the attachment. Each attachment has its own load chart, which the operator must know before use.

  • Fork carriage and pallet forks: lifting material onto floor slabs, scaffolding and roofs or unloading trucks.
  • Load hook, winch and crane jib: The Roto works as a mobile crane and places loads over obstacles such as parapets or roof overhangs.
  • Work basket: With a basket approved for the model, the Roto becomes an aerial work platform for installation, facade work and maintenance at height.
  • Further attachments: We put together buckets and special grabs on request.

Which attachments suit your model is shown in the overview Attachments for telehandlers. Name the attachment you need in your enquiry, and we will plan machine and tool together.

Weight and outriggers decide whether the Merlo Roto suits your site

Depending on the model, a Merlo Roto weighs between 12,900 kg (Roto 40.16) and 23,350 kg (Roto 50.35S Plus). Clarify access, ground conditions and set-up area before you send your enquiry.

  • Access: The models are 2.24 to 2.54 m wide and 2.98 to 3.325 m high. Gates, passages and bends on the way to the set-up position must allow for this.
  • Ground: The outriggers transfer the load into the ground at specific points. On soft ground, backfill or above basement ceilings, load-spreading pads are needed; if in doubt, a structural engineer decides.
  • Set-up area: Allow space for the extended outriggers and the slewing range of the superstructure, and cordon off this area during operation.
  • Transport: We organise transport by low-loader from our Passau location throughout the Czech Republic. The low-loader needs a paved area for unloading.

Operators of a Merlo Roto need a qualification matching the rotating machine

Anyone operating a roto telehandler needs more than the basic telehandler qualification. In the Czech Republic, the applicable occupational safety rules (Act No. 309/2006 Coll.) and Government Regulation No. 378/2001 Coll. on the safe operation of machinery are decisive.

  • Basic qualification: It qualifies the operator to run a telehandler in forklift mode.
  • Qualification for rotating machines: Telehandlers with a rotating superstructure require an operator qualification matching this machine type in line with applicable Czech safety rules and CSN EN standards.
  • Qualification for basket and crane operation: Anyone working with a work basket or load hook needs a matching qualification for each of these modes. Personal fall protection equipment is used in the basket in line with Government Regulation No. 362/2005 Coll. (work at height).
  • Briefing and appointment: The employer briefs the operator on the specific machine and appoints them to operate it.

Luibl Rental does not offer training itself but informs you about certified providers. More on the Trainings page.

FAQ: Merlo Roto telehandlers

chevronDown

How high does a Merlo Roto telehandler lift?

Up to 34.00 m: that is the lift height of the Merlo Roto 50.35S Plus, the largest Roto model in the Luibl Rental fleet. The smallest model, the Roto 40.16, reaches 15.80 m. Load capacity ranges from 4,000 to 7,500 kg depending on the model; at great height and outreach, the permissible load according to the load chart is significantly lower.

What is the difference between a Merlo Roto and a fixed Merlo telehandler?

The Roto has a rotating superstructure, the fixed telehandler does not. A Roto slews the load all around the machine and works from one position on its outriggers. A fixed machine only lifts forwards and has to be repositioned for every new load point, but it is usually more economical for pure material handling.

What qualification do I need for a roto telehandler?

You need an operator qualification matching a telehandler with a rotating superstructure, in line with applicable Czech safety rules and CSN EN standards. For work with a work basket or load hook, you also need a matching qualification for that mode. The employer briefs the operator on the specific machine and appoints them to operate it. Luibl Rental does not train operators itself but informs you about certified providers on its Trainings page.

Can a Merlo Roto be used as a crane?

Yes, with a load hook, winch or crane jib a Merlo Roto works as a mobile crane. Each of these attachments has its own load chart, and the operator needs the matching qualification. Name the attachment in your enquiry for this reason.

Can a Merlo Roto lift people to height?

Yes, but only with a work basket approved for the specific model. Everyone in the basket uses personal fall protection equipment in line with Government Regulation No. 362/2005 Coll., and the operator needs a matching qualification.

How does a Merlo Roto get to the site?

By low-loader: we organise transport from our Passau location throughout the Czech Republic. The Roto models weigh between 12,900 and 23,350 kg and are up to 2.54 m wide. Clarify access, unloading area and ground bearing capacity in advance, and plan the job early so that machine and transport can be scheduled in good time.

Request a Merlo Roto: with these details we prepare your quote

The more precise your enquiry, the better our model proposal fits. These details help our dispatch team:

  • site location and rental period
  • required lift height and the heaviest load with its distance from the machine
  • attachments, for example work basket, winch or forks
  • access and ground conditions at the set-up position

You will promptly receive a quote with model, transport and attachments. Request a Merlo Roto quote now.