Aerial work platform, telehandler and excavator rental in Brno

Aerial work platform, telehandler and excavator rental in Brno

Luibl Rental delivers aerial work platforms, telehandlers, excavators and forklifts to Brno by low-loader from Passau - for a hall market. Unlike Prague, where access to the facade determines the choice, work in South Moravia is mostly done indoors: in production halls in Kralovo Pole and Slatina, at the exhibition centre, in laboratory buildings at the technology park. This shifts the selection criteria - drive type, floor loading and stowed height become more important than working height alone.

Image of a rental machine of type 1.2 t Electric Stacker | EP ESL 122 2700 mm

1.2 t Electric Stacker | EP ESL 122 2700 mm

Lifting height
2,70 m
Lifting capacity
1.200 kg
Drive unit
Electric
Image of a rental machine of type Stacker 1.2 t | EP ESL 122 3300 mm

Stacker 1.2 t | EP ESL 122 3300 mm

Lifting height
3,30 m
Lifting capacity
1.200 kg
Drive unit
Electric
Image of a rental machine of type 1.5 tonne electric tricycle | Hyundai 15BT-9 5500 mm

1.5 tonne electric tricycle | Hyundai 15BT-9 5500 mm

Lifting height
5,50 m
Lifting capacity
1.500 kg
Drive unit
Electric
Image of a rental machine of type Stacker 1.6 t | EP ES16-16WA 4300 mm

Stacker 1.6 t | EP ES16-16WA 4300 mm

Lifting height
4,30 m
Lifting capacity
1.600 kg
Drive unit
Electric

Working in production and assembly halls

In ongoing production, three things are non-negotiable: no exhaust fumes, no tyre marks on the hall floor, and the machine must fit through the sectional door.

Electric scissor lifts meet all three requirements. The rental fleet covers working heights of 6.30 to 33.00 m, with platform loads of 227 to 1,000 kg. For work on crane runways, hall lighting and ventilation systems under the roof, the large models from 18 m are the right choice; for maintenance on production lines, 8 to 12 m with a large platform area is usually sufficient.

When you enquire, pay attention to two dimensions that are often overlooked: the stowed height (it decides whether the platform can get into the hall at all) and the permissible floor pressure - for floors with underfloor heating or above basements, this is the critical value.

For rack aisles in distribution halls along the D1 and D2, there are high-rack scissor lifts with 18.50 to 33.00 m and a narrow track.

Exhibition stand construction: working within the time window

The Brno exhibition centre has its own rhythm. Set-up and dismantling take place in tight, often night-time windows, with several trades at the same time, and at the end the hall must be left broom-clean.

For this, mast lifts with 10.00 to 12.65 m are the most practical class: light, narrow, movable by one person, and they fit through standard doors. For trusses, lighting and banner installation at great height, compact electric scissor lifts are added.

Plan the rental period beyond the exhibition window - dismantling is delayed more often than set-up, and an extended rental is cheaper than a second delivery.

Technology park and laboratory buildings

Cleanroom, laboratory and data centre projects bring requirements that play no role on conventional sites: non-marking tyres, low-particle drives, work in areas already handed over. Mention this in your enquiry - we will match the machine selection to it in advance instead of swapping machines later.

The rental fleet in figures

ClassWorking heightBasket load
Electric scissor lifts6.30 - 33.00 m227 - 1,000 kg
Diesel scissor lifts9.70 - 34.00 m363 - 1,134 kg
High-bay scissor lifts18.50 - 33.00 m450 - 1,000 kg
Articulating boom lifts10.89 - 48.15 m150 - 450 kg
Telescopic boom lifts14.00 - 56.90 m227 - 454 kg
Mast lifts10.00 - 12.65 m200 kg
Spider lifts13.00 - 39.50 m200 - 400 kg

For facade and roof work on existing buildings in Brno where direct access is not possible, articulating boom lifts provide the necessary reach over obstacles. The greatest working height in the range is achieved by telescopic boom lifts with 56.90 m.

Telehandlers and excavators for South Moravian projects

On Brno's industrial sites, the telehandler is the usual companion to the platform. Fixed models lift 4.30 to 18.80 m with a load capacity of 1.25 to 25 t. Roto telehandlers reach 15.42 to 38.90 m and work all around from a single set-up - on cramped factory yards this replaces repeated repositioning. For moving material inside buildings, electric telehandlers with 5.85 to 30.00 m are available.

Excavators from 1.8 t to 30 t for site servicing, foundations and interior demolition. In addition, forklifts from 3 to 16 t and stackers with 2.70 to 5.50 m.

Transport to Brno and scheduling

Brno is around 320 km from our base in Passau. We organise transport with our own low-loaders and partner hauliers.

For plant shutdowns and trade fair dates, we agree the time window together in advance - these dates are fixed months ahead, and the machines for them are scheduled correspondingly early. For planned shutdown work, please therefore enquire in good time, not in the week before.

For requirements of several months, we invoice at long-term rental rates. Combinations of platform and telehandler are priced as a package - one transport, one contact person, one invoice.

Inspection, documentation and operator obligations in the Czech Republic

Every machine is delivered with a valid inspection record, CE documentation and operating manual. We keep track of inspection deadlines and maintenance history for the entire rental fleet.

Operator obligations at the place of use are governed by the law of the country of use. For the Czech Republic, Government Regulation No. 378/2001 Coll. is decisive; it contains a separate annex for equipment for lifting loads and persons. The inspection of mobile elevating work platforms follows CSN EN 280.

We supply the documents for your records - risk assessment and operator instruction on site remain your responsibility. The visual and function check before starting work is the operator's duty, regardless of whether the machine is rented or owned.

Rent aerial work platforms -> | Send an enquiry ->

Which platform type suits your job? The overview Lifting platform rental - all platform types at a glance explains scissor lifts, articulating and telescopic boom lifts, mast lifts, spider lifts and truck-mounted platforms and shows what the rental price depends on.

Frequently asked questions about rental in Brno

chevronDown

Which aerial work platform may be used in a running production hall?

An electrically driven one. Electric scissor lifts and articulating boom lifts operate quietly and without local emissions and are therefore suitable for indoor operation, whereas diesel machines are ruled out in enclosed spaces. Also check the permissible ground pressure of the hall floor and whether non-marking tyres are required.

How high does the tallest aerial work platform in the rental fleet reach?

56.90 m with a telescopic boom lift. It needs a load-bearing set-up area and space for the outriggers. Articulating boom lifts reach 48.15 m and additionally offer reach over obstacles.

When should I enquire for a plant shutdown?

As soon as the shutdown date is fixed. Shutdowns and trade fairs move many machines at the same time; if you enquire at the last minute, you are more likely to get an alternative than the machine you want. By arrangement, we reserve machines for fixed time slots.

What working heights do Luibl's aerial work platforms reach in Brno?

Depending on the model, from 6 m up to 57 m.

How soon can I rent an aerial work platform in Brno?

Prompt confirmation. Daily and long-term rentals possible.

Does an aerial work platform fit through a standard hall door?

That depends on the stowed passage height, not on the working height. Compact scissor and mast lifts stay well below 2 m and fit through standard sectional doors; large machines from 18 m working height need more. State the clear height of your door in your enquiry.

Which machine reaches chimneys and tall equipment?

The telescopic boom lift with up to 56.90 m working height - the highest value in the rental fleet. A paved, load-bearing set-up area with space for the outriggers is required. If the base point is obstructed, the articulating boom lift with 48.15 m and horizontal up-and-over reach is the alternative.