Aerial work platform and construction machinery rental in Hradec Kralove
Aerial work platforms and construction machinery for Hradec Kralove are ordered above average into areas that are not an ordinary site access. The city lives on pharmaceutical production, electrical engineering and medical technology - sectors in which a work area is not simply entered but released by permit. An enquiry here therefore needs more than working height and platform load: it also needs the cleanliness requirement of the area, the permissible emissions and the rules for access and documentation. This page shows which machine classes are suitable.
Working in cleanrooms and controlled areas: requirements for the machine
In a controlled area or cleanroom, the machine is part of the monitored environment. Four properties decide whether it may be brought in.
Drive without local emissions. Combustion engines are ruled out. Electric scissor lifts cover 6.30 to 33.00 m working height with 227 to 1,000 kg platform load and are the standard class for indoor work on level floors. Where reach over a plant is needed, electric articulating boom lifts work from 10.89 to 28.00 m with 150 to 280 kg platform load.
Non-marking tyres. Coated and seamless floors are sensitive to standard tyres - the tyres are an exclusion criterion and must be explicitly requested in the enquiry.
Low particle and oil release. The cleaner the area, the more important are enclosed hydraulics, clean running surfaces and cleaning before the machine is brought in.
Suitable dimensions. In cleanrooms and laboratories the route rarely leads through a hall door. Mast lifts with 10.00 to 12.65 m are the most practical class here: they fit through standard doors and can be moved by one person.
Access, permits and maintenance windows instead of a permanent site
The second difference from a normal construction site lies in the timing. In pharmaceutical and medical technology plants, work is not continuous but done in windows: during a planned plant shutdown, between two batches, the night before a requalification. The window is tight and rarely moves back.
The rental period should overlap it at both ends - handing over the area and final cleaning take time that is usually missing from the plan. Access rules, passes and escort requirements apply to external machines as to external staff; check in advance whether the machine must be documented before it is brought in. For recurring maintenance cycles, we reserve machines for fixed time windows by arrangement.
Maintenance of ventilation and media systems below the hall ceiling
The second major reason for enquiries lies overhead: ventilation ducts, filter housings, ultra-pure media and compressed air lines, sprinkler systems, lighting and cable trays - close under the ceiling and only reachable from scaffolding with considerable effort. For long, straight runs the scissor lift is economically superior: the large platform holds tools and material, and a section can be completed from one set-up. Where obstacles are in the way, the articulating boom lift with 10.89 to 48.15 m comes into play; in storage areas with narrow aisles, high-rack scissor lifts with 18.50 to 33.00 m take over work on racking, sprinklers and lighting.
Calculate the platform load as persons plus material: two fitters with a tool case, duct sections and fixing material quickly exceed 300 kg, which rules out the 227 kg models. Also check the permissible floor load - in halls with basements and floors with underfloor heating, the point load is more often the exclusion criterion than the dimensions.
The rental fleet in figures
| Class | Working height | Basket capacity |
|---|---|---|
| Scissor lifts electric | 6.30 - 33.00 m | 227 - 1,000 kg |
| Scissor lifts diesel | 9.70 - 34.00 m | 363 - 1,134 kg |
| High-rack scissor lifts | 18.50 - 33.00 m | 450 - 1,000 kg |
| Articulating boom lifts | 10.89 - 48.15 m | 150 - 450 kg |
| Telescopic boom lifts | 14.00 - 56.90 m | 227 - 454 kg |
| Mast lifts | 10.00 - 12.65 m | 200 kg |
| Spider lifts | 13.00 - 39.50 m | 200 - 400 kg |
Outside the protected areas, the usual division applies: diesel scissor lifts with 9.70 to 34.00 m and up to 1,134 kg platform load for unpaved ground, telescopic boom lifts with 14.00 to 56.90 m for chimneys and silos, spider lifts with 13.00 to 39.50 m where there is no room for wide outriggers.
Construction machinery for industrial sites in the Hradec Kralove region
Extensions and media lines on the plant premises are the usual reason for construction machinery. Telehandlers distribute material where there is no crane - fixed machines with 4.30 to 18.80 m and 1.25 to 25 t load capacity, roto models with 15.42 to 38.90 m for confined plant yards, electric models with 5.85 to 30.00 m for the hall. Plus excavators from 1.8 to 30 t operating weight for utility trenches, foundations and interior demolition, as well as forklifts from 3 to 16 t and high-lift pallet trucks with 2.70 to 5.50 m lift height.
Inspections, records and operator obligations under Czech law
Every machine is handed over with a valid inspection record, CE documentation and operating manual. We keep inspection intervals and maintenance history without gaps - in sectors with documentation requirements, experience shows this is the point that gets queried internally.
Which law applies is determined by the place of use. In the Czech Republic this is Government Regulation No. 378/2001 Coll., in force since 1 January 2003, with its own annex for equipment for lifting loads and persons; the inspection of mobile elevating work platforms follows CSN EN 280, and the framework is set by the Labour Code (No. 262/2006 Coll.) and Act No. 309/2006 Coll. We provide the inspection record and technical documentation; you prepare the risk assessment, instruct the operators and carry out the check at the start of each shift.