VAS-600 | Uplifter vacuum lifter UPG600

Bild 0 einer Mietmaschine vom Typ VAS-600 | Uplifter vacuum lifter UPG600
Vorschaubild 0 einer Mietmaschine vom Typ VAS-600 | Uplifter vacuum lifter UPG600

Technical data

Below you will find all product details.

Uplifter UPG600 vacuum lifter hire – glass vacuum lifter up to 600 kg

The Uplifter UPG600 vacuum lifter is an attachable glass vacuum lifter for the medium to heavy class: depending on configuration, it lifts 300 kg (4 suction cups), 450 kg (6 suction cups) or 600 kg (8 suction cups). Spring-loaded, articulated suction pads compensate for inclined and slightly uneven surfaces, and an optional remote control makes it easier to work at a distance. As the owner of Uplifter, Luibl Group rents out the UPG600 at short notice, serviced, inspected and throughout Europe.

Technical data: Uplifter UPG600 vacuum lifter

Data from the official Uplifter product information. We will confirm binding values for your carrier machine and component on request.

FeatureValue
Load capacity (4 suction cups)300 kg
Load capacity (6 suction cups)450 kg
Load capacity (8 suction cups)600 kg
Suction padsspring-loaded plunger with joint (tilt compensation)
Operationremote control and push-button control optional
Rotationmanual 360°, detent every 45°
Suction cupssilicone-free (no marks)
Mountingon any machine with a load hook (crane, mini crane, telehandler, excavator)
Vacuum generation / power supplymains-independent 12 V battery power supply
Own weight / dimensionsapprox. 89 kg; length max./min. 2.57/1.13 m; width max./min. 1.35/0.91 m

Design and equipment

Two features set the UPG600 apart from the smaller models. First, the spring-loaded, articulated suction pads: they adapt to inclined or slightly profiled surfaces and reliably create a vacuum even where rigid suction cups would slip – for example with roof glazing or curved elements. Second, the optional remote and push-button control, which allows one person to trigger suction and release from a safe distance. The load capacity increases with the number of suction cups from 300 to 450 to 600 kg.

Suitable carrier machines

The UPG600 is attached to a lifting device with a load hook. For higher loads and greater reach, telehandlers are the right choice; in confined spaces, mini cranes. Luibl Group keeps both carrier classes in its rental fleet and supplies them together with the vacuum lifter on request.

Applications

  • Facade construction: installing heavier insulating glass units up to 600 kg.
  • Roof and sloped glazing: thanks to the tilt compensation of the spring-loaded suction pads.
  • Metal and element construction: handling heavy sheets and panels.
  • Industry: glazing of continuous rooflights and large fixed lights.

Advantages of hiring from Luibl

  • Close to the manufacturer: directly from the owner of Uplifter, handed over inspected.
  • Optional remote control: included on request.
  • Vacuum lifter plus carrier: telehandler or mini crane from a single source.
  • Inspected, at short notice, throughout Europe.

Hire or buy?

The UPG600 is an attachment with a noticeable purchase price that only pays off with regular use. Hiring keeps capital free, covers inspection and maintenance and allows you to switch between vacuum lifter models depending on the weight of the glass pane.

CriterionHire from LuiblPurchase
Capital employedproject-relatedtied up once
Inspection & maintenanceincludedown effort
Equipment (remote control)optionally bookablemust be purchased
Carrier machinecan be hired as wellseparate

Safety

The UPG600 is handed over serviced and inspected. On inclined surfaces, the permissible angle of inclination must be observed despite the spring-loaded suction pads. The permissible load capacity also depends on the carrier machine and its load centre. We hand over the inspection certificates together with the device.

Other vacuum lifters and carrier machines

Lighter tasks are handled by the UPG350 and UPG450; for heavy loads, the UPG1000 and UPG1200 are available. The Glassworker series offers a self-propelled glazing robot. A mini crane is suitable as a carrier.

Frequently asked questions about the Uplifter UPG600

How much does the UPG600 lift?

Depending on the number of suction cups, 300 kg (4 suction cups), 450 kg (6 suction cups) or 600 kg (8 suction cups).

Is the UPG600 suitable for inclined surfaces?

Yes. The spring-loaded, articulated suction pads compensate for inclines and are therefore also suitable for roof and sloped glazing.

Is there a remote control?

Remote and push-button control are available as options and can be added to the hire.

What is the vacuum lifter attached to?

To any lifting device with a load hook – such as a telehandler, mini crane, crane or excavator; Luibl supplies the carrier machine on request.

Is the UPG600 inspected?

Yes, every device is serviced and inspected; the certificates are included.

Request the Uplifter UPG600 now

Request your non-binding rental quote for the UPG600 – including optional remote control and a suitable carrier machine.

More articles in the category Vacuum Technology

Image of a rental machine of type GW-295 | Uplifter Glassworker GW295

GW-295 | Uplifter Glassworker GW295

Image of a rental machine of type GW-425 | Uplifter Glassworker GW425

GW-425 | Uplifter Glassworker GW425

Image of a rental machine of type VAS-1000 | Uplifter vacuum lifter UPG1000

VAS-1000 | Uplifter vacuum lifter UPG1000

Image of a rental machine of type VAS-1200 | Uplifter vacuum lifter UPG1200

VAS-1200 | Uplifter vacuum lifter UPG1200

Image of a rental machine of type VAS-350 | Uplifter vacuum lifter UPG350

VAS-350 | Uplifter vacuum lifter UPG350

Image of a rental machine of type VAS-450 | Uplifter vacuum lifter UPG450

VAS-450 | Uplifter vacuum lifter UPG450

Image of a rental machine of type VAS-600 | Uplifter vacuum lifter UPG600

VAS-600 | Uplifter vacuum lifter UPG600

Mehr anzeigen