Aerial work platform, telehandler and excavator rental in Prague

Aerial work platform, telehandler and excavator rental in Prague

Luibl Rental delivers aerial work platforms, telehandlers, excavators and forklifts to Prague by low-loader from Passau - matched to two very different job situations. In the Old Town, the width of the courtyard entrance decides which machine can reach the working point at all. In Karlin, Holesovice and the logistics parks on the outskirts, working height and platform area are what matter. This page matches the rental fleet to Prague job situations - with the figures that count for selection.

Image of a rental machine of type 1.2 t Electric Stacker | EP ESL 122 2700 mm

1.2 t Electric Stacker | EP ESL 122 2700 mm

Lifting height
2,70 m
Lifting capacity
1.200 kg
Drive unit
Electric
Image of a rental machine of type Stacker 1.2 t | EP ESL 122 3300 mm

Stacker 1.2 t | EP ESL 122 3300 mm

Lifting height
3,30 m
Lifting capacity
1.200 kg
Drive unit
Electric
Image of a rental machine of type 1.5 tonne electric tricycle | Hyundai 15BT-9 5500 mm

1.5 tonne electric tricycle | Hyundai 15BT-9 5500 mm

Lifting height
5,50 m
Lifting capacity
1.500 kg
Drive unit
Electric
Image of a rental machine of type Stacker 1.6 t | EP ES16-16WA 4300 mm

Stacker 1.6 t | EP ES16-16WA 4300 mm

Lifting height
4,30 m
Lifting capacity
1.600 kg
Drive unit
Electric

Which aerial work platform suits which Prague site?

Old Town, Mala Strana, Vinohrady: access before height

In the historic centre, the limiting factor is almost never the working height but the route to it. Courtyard passages with less than 1 m clear width, cobblestones, vaulted cellars under the inner courtyard and ground bearing capacity that rules out a heavy chassis.

Spider lifts are the standard answer here: tracked undercarriage, low ground pressure, narrow transport width, working heights of 13.00 to 39.50 m with 200 to 400 kg platform load. For interior work in occupied buildings - stairwells, shops, hotel lobbies - mast lifts with 10.00 to 12.65 m are the lightest class and fit through standard doors.

Karlin, Holesovice, Smichov: height and platform area in new builds

In the new districts, work takes place on finished floors inside the building: drywall, electrical, ventilation, sprinklers. This is what electric scissor lifts are made for - no local emissions, gentle on floors, with the largest platform area of all classes. The rental fleet covers 6.30 to 33.00 m, with platform loads of 227 to 1,000 kg.

The rule of thumb for selection: calculate platform load for people plus material, not people alone. Two fitters with tools and material quickly exceed 300 kg - which rules out the small 227 kg models even though the working height would fit.

Industry, logistics and data centres on the outskirts

High-rack maintenance, crane runways, hall lighting, fire protection systems. Here, reach over obstacles and stability on unpaved ground are what count.

The rental fleet in figures

ClassWorking heightBasket capacity
Scissor lifts electric6.30 - 33.00 m227 - 1,000 kg
Scissor lifts diesel9.70 - 34.00 m363 - 1,134 kg
High-rack scissor lifts18.50 - 33.00 m450 - 1,000 kg
Articulating boom lifts10.89 - 48.15 m150 - 450 kg
Telescopic boom lifts14.00 - 56.90 m227 - 454 kg
Mast lifts10.00 - 12.65 m200 kg
Spider lifts13.00 - 39.50 m200 - 400 kg

Construction machinery for Prague projects

In Prague, telehandlers mostly handle material distribution where there is no crane. Fixed models lift 4.30 to 18.80 m at 1.25 to 25 t. Roto telehandlers with a rotating superstructure reach 15.42 to 38.90 m and work all round from a single set-up - the decisive advantage in tight courtyards where repositioning is not possible. Electric telehandlers with 5.85 to 30.00 m for work inside buildings.

Excavators for utility trenches, foundations and interior demolition: from 1.8 t mini excavators to 30 t crawler excavators. The 1.8-tonne machine fits through courtyard entrances and onto construction hoists; the 14- to 30-tonne machines are intended for civil engineering and demolition on the outskirts.

For handling in halls and warehouses: forklifts from 3 to 16 t and pedestrian stackers with 2.70 to 5.50 m lift height.

Transport to Prague and the Central Bohemian Region

Prague is around 300 km from our base in Passau - via the D5 from the Waidhaus border crossing, it is a continuous motorway connection. We organise transport with our own low-loaders and partner hauliers and coordinate the delivery date with your construction schedule.

Besides Prague, the delivery area covers the entire Central Bohemian Region. The same scheduling applies to projects in Kladno and Mlada Boleslav.

For requirements of several months, we bill at long-term rental rates - considerably cheaper than daily rental. We price combinations of platform and telehandler as a package, which means one transport and one invoice instead of two.

Inspection, documentation and operator obligations

Every machine is delivered with a valid inspection record, CE documentation and operating manual. We keep track of inspection deadlines and maintenance history for the entire rental fleet.

Important for use in the Czech Republic: operator obligations at the place of use are governed by the law of the country of use, not that of the hirer. For the Czech Republic, this includes Government Regulation No. 378/2001 Coll. on detailed requirements for the safe operation and use of machinery and technical equipment; the inspection of mobile elevating work platforms follows CSN EN 280. We supply the documents you need as evidence - risk assessment and operator instruction on site remain your responsibility.

The visual and functional check before each start of work is the operator's obligation, regardless of whether the machine is rented or owned.

Rent aerial work platforms -> | Send an enquiry ->

Working height, outreach and ground conditions determine the right machine. A comparison of all platform types including costs and inspection requirements is available at Lifting platform rental: platform types, costs and applications.

Frequently asked questions about aerial work platform rental in Prague

chevronDown

Can electric platforms be used while operations continue?

Yes, that is what they are built for. Electric scissor lifts and articulating boom lifts work quietly and without local emissions, making them suitable for interiors, food businesses, data centres and public buildings. With non-marking tyres, finished floor coverings also remain undamaged - please state this in your enquiry.

Which aerial work platform fits through a Prague courtyard passage?

Usually a spider lift. It has the narrowest transport width and the lowest ground pressure in the range and still reaches 13 to 39.5 m working height. Measure the clear width and height of the passage and the bearing capacity of the courtyard in advance - for courtyards with cellars below, the outrigger load is often the real exclusion criterion, not the width.

What do I need to state in my enquiry?

Four details are enough for a reliable quote: the required working height, the weight of persons plus material in the basket, the ground and access situation at the place of use, and the rental period. Please also state whether electric or diesel drive is required - indoors and for night work this is often specified.

How high does the tallest aerial work platform in the rental fleet reach?

56.90 m working height. This is a telescopic boom lift; it needs a firm, load-bearing set-up area and enough space for the outriggers. Articulating boom lifts reach 48.15 m and additionally offer reach over obstacles.

Do I need a permit to set up a machine on public ground in Prague?

As a rule, yes. Using the pavement, parking lane or carriageway requires a special-use permit for the road from the competent authority (Prague City Hall or the relevant district office), and if traffic is affected, a temporary traffic arrangement order as well. Apply early - processing takes time. The permit is the responsibility of the client or the contractor carrying out the work, not the rental company.