Aerial work platform and construction machinery rental in Jihlava

If you rent aerial work platforms and construction machinery in Jihlava, you are planning for a location with a special geographical role: the city lies almost exactly halfway between Prague and Brno, right on the D1 motorway. Added to this is the altitude of the Vysocina region of around 500 metres, with a noticeably longer frost period than in the Bohemian lowlands. This page matches the rental fleet to these two conditions: the motorway corridor and the climate.

Along the D1, distribution centres and supplier plants line up between Jihlava and the two metropolises. Anyone building or maintaining there rarely works on just one site: a warehouse near Jihlava, a second towards Brno, a third near Prague - with the same hall technology and often an identical maintenance plan. A machine for several sites is therefore delivered once and moved between the locations instead of going back on the low-loader each time. Tell us in your enquiry whether a job stands alone or is part of a chain.

Inside the halls, two tasks dominate. For sprinkler systems, ventilation and lighting over open floor space, electric scissor lifts are the standard solution: 6.30 to 33.00 m working height, basket loads from 227 to 1,000 kg, zero local emissions and the largest platform area of all classes. Between stored goods, high-bay scissor lifts with 18.50 to 33.00 m are used - the same heights with a narrower track, so the aisle does not have to be cleared.

The Vysocina region lies higher than the surrounding area and freezes earlier and for longer. The window for outdoor construction is shorter than in Prague or Brno, and whatever is not finished in autumn moves to the next spring - hence the peak in September and October, when facades, roofs and earthworks are all meant to be completed at the same time.

For machine selection, the ground is what counts: with freeze-thaw cycles, a surface bears loads differently in the morning and afternoon - a set-up that holds when frozen may sink later. Where bearing capacity fluctuates, spider lifts with 13.00 to 39.50 m are the more reliable choice: tracked undercarriage, lowest ground pressure in the range. On load-bearing but unpaved ground, diesel scissor lifts with four-wheel drive are the right choice - 9.70 to 34.00 m with up to 1,134 kg basket load, the highest in the rental fleet. Then there is winter operation: plan for cold starting conditions, allow for sluggish hydraulics, and use outrigger pads on frozen as well as softened ground.

The second major customer group around Jihlava is component manufacturing for the automotive industry. Work is carried out while production is running or only briefly interrupted - so the drive and floor loading are decisive, not the working height. For conveyor technology, extraction and media lines, 8 to 12 m is usually enough. If the work point is behind a piece of equipment, articulating boom lifts with 10.89 to 48.15 m are the answer; in staff and office wings, mast lifts with 10.00 to 12.65 m are the lightest class and fit through standard doors.

Basket load is regularly underestimated: two people with a tool case and a gearbox part quickly exceed 300 kg, ruling out the 227 kg models even though the height would have been right. For silos and hall roofs from outside, telescopic boom lifts with 14.00 to 56.90 m reach the greatest working height in the range.

Class	Working height	Basket capacity
Scissor lifts electric	6.30 - 33.00 m	227 - 1,000 kg
Scissor lifts diesel	9.70 - 34.00 m	363 - 1,134 kg
High-rack scissor lifts	18.50 - 33.00 m	450 - 1,000 kg
Articulating boom lifts	10.89 - 48.15 m	150 - 450 kg
Telescopic boom lifts	14.00 - 56.90 m	227 - 454 kg
Mast lifts	10.00 - 12.65 m	200 kg
Spider lifts	13.00 - 39.50 m	200 - 400 kg

Telehandlers take over material distribution where there is no crane - the norm for hall extensions along the D1. Fixed models lift 4.30 to 18.80 m at 1.25 to 25 t; roto telehandlers reach 15.42 to 38.90 m and work all around from one set-up.

Excavators are available from 1.8 to 30 t operating weight - from mini excavators for utility trenches to the 30 t class for developing industrial estates. For handling and storage, there are also forklifts from 3 to 16 t and high-lift pallet trucks with 2.70 to 5.50 m lift height.

Every machine leaves our yard with valid proof of inspection, CE documentation and operating manual; we keep records of inspection intervals and maintenance history for the entire rental fleet.

The law of the country of use applies. In the Czech Republic, the key regulation is Government Regulation No. 378/2001 Coll., which governs the safe operation and use of machinery and technical equipment and provides a separate annex for equipment for lifting loads and persons. Mobile elevating work platforms are inspected in accordance with CSN EN 280; the framework is set by the Labour Code (No. 262/2006 Coll.) and Act No. 309/2006 Coll.

We provide proof of inspection and documentation; the risk assessment and operator instruction remain with the hirer, and the visual and function check before starting work is an operator obligation. In supplier plants, plant rules also apply - driving permits, safety instruction, sometimes a requirement on the type of drive. Clarify these conditions before the low-loader sets off.

From our Passau location it is around 250 km to Jihlava. We organise transport with our own low-loaders and partner hauliers and coordinate the delivery date with your construction schedule. For requirements covering an entire construction season, we charge at long-term rental rates; we price platform and telehandler as a package. Jobs further along the D1 are planned in the same run.

Rent aerial work platforms -> | Send an enquiry ->